product

Sodium Umiguard Biocide/Dispersion for marine anti-fouling

Sodium pyrithione (chemical formula C5H4NOSNa) is a broad-spectrum antimicrobial and antifungal agent, also referred to as pyrithione sodium or omadine sodium. The compound in its pure form is a white to off-white powder, which is freely soluble in both water and ethanol. It is typically supplied as a 40% aqueous solution and exhibits stability under neutral to alkaline conditions.

Chemical Name :
Sodium Umiguard NaPT
Application :
Efficient inhibition of hard-shell biobased shellfish and barnacles
Product model :
Copper Umiguard Powder/paste, Zinc Umiguard Powder/paste, Sodium Umiguard Powder, Tralopyril, Zinc Acrylate SPC

Inquiry now

product introduction

Advantages:

Long-term antifouling performance guarantee;

Works well on soft -fouling organisms and provides completeantifouling protection when used with cuprous oxide;

Green environmental protection type antifouling agent;

Efficient releases of biocides from the coating overthe lifetime of the product;

Chemical substances in line with BPR/EPA regulations

Application:

General properties:

• Exhibits pronounced growth inhibiting activity against a broad spectrum of both Gram negative and Gram-positive bacteria.

• Inhibits the growth of fungi, both yeast and mold.

• Is insoluble in water, about 1 ppm at pH 7.0

• Very low solubility in solvents, typically less than 10 ppm

• Inhibits the growth of algae

Packaging & storage:

The package is 80kg stainless steel barrel with 20kg high density polyethylene bag inside.

Confined space shall be stored separately, and the warehouse shall be kept as dry as possible.

Marine anti-fouling products series:

Product	Chemical	Form	Functions
Copper Umiguard Powder	Copper Pyrithione(CPT)	Powder	Soft-shell organisms, algae and fungi
Zinc Umiguard Powder	Zinc Pyrithione(ZPT)	Powder	Soft-shell organisms, algae and fungi
Copper Umiguard Paste	Copper Pyrithione(CPT)	Liquid	Soft-shell organisms, algae and fungi
Zinc Umiguard Paste	Zinc Pyrithione(ZPT)	Liquid	Soft-shell organisms, algae and fungi
Sodium Umiguard Powder	Sodium Pyrithione(NaPT)	Powder	Hard-shelled organisms aswell as shellfish and barnacles
Tralopyril	Tralopyril	Powder	Hard-shell organisms, algae and fungi
Zinc Acrylate SPC	Zinc Acrylate Resin Copper Pyrithione	Liquid	Anti-fouling paint resin

Tags :

Leave A Message

categories

Featured products

Related Products

In-Can Preservatives Umiguard MBS for water-based pigment paste

Umiguard MBS is effective in polymer emulsions, paints, adhesives, pigment dispersions and household products. Umiguard MBS has a non-specific mode of action which means that bacterial resistance is very unlikely to occur. Detailed information on the mode of action is available on request.

Copper oxideis Cu₂O for marine anti-fouling coatings

Cuprous oxides avalence oxide of copper, bright red material, the chemical formula is Cu₂O, the relative molecular mass is 143.08. It is almost insoluble in water, in acid solution disproportionation of cupric and copper, it oxidates gradually into black cupric oxide in the wet air.  It's used as antipollution paint in the bottom of ship to kill lows forms of marine animal live; it can be also used as germicide, coloring agent in red glass. lt can also used in manufacturing kinds of nantokite, analytical regent and rectifier electroplate of electric appliances industry.

Industrial grade antimicrobial preservative Umiguard MB5050

Umiguard MB5050 is effective in polymer emulsions, paints, adhesives, pigment dispersions and household products. Uamiguard MB5050 has a non-specific mode of action which means that bacte rial resistance is very unlikely to occur. Detailed information on the mode of action is available on request.    

In-Can Preservatives Umiguard BCI for industrial waterborne coatings

Umiguard BCI is broad spectrum preservative for the protection of industrial water-based products against spoilage from bacteria, yeasts and fungi. It is a formulation of 1,2-benzisothiazolin-3-one (BIT) and a 3:1 blend of 5-chloro-2-methyl-4-isothiazolin-3-one (CMIT) and 2-methyl-4-isothiazolin-3-one (MIT) that has been specially formulated to provide good preservation at levels of 0.17% and below.   

In-Can Preservatives Umiguard CMC

Umiguard CMC is an efficient broad-spectrum bactericidal preservative, which is used to protect waterborne industrial products from infection by bacteria, yeast and mold. This product is a compound product of chloromethyl isothiazolinone and methyl isothiazolinone, which can ensure the stability of water-based coating system.. Our formulation range offers benefitsincluding long-term preservation, fast-acting disinfection, temperatureand pH stability, zero VOC content and low viscosity for ease of handing. To meet modern market requirements ( EUH 208 and EN71 regulations).our in-can biocide range includes formulations that are free fromhalogens,formaldehyde, CMT/MT and MIT.  

In-Can Preservatives Umiguard K150 for water-based coatings

Umiguard K150 is an efficient broad-spectrum bactericidal preservative, which is used to protect waterborne industrial products from infection by bacteria, yeasts and molds. This product is a compound product of chloromethyl isothiazolinone and methyl isothiazolinone, which has good compatibility for systems that are easy to demulsify and can ensure the stability of emulsion and water-based coatings.  

Umiguard Tralopyril for Marine antifouling biocide

In the sea water environment, the surface of the ship is easily attached by organisms such as algae, shells, and barnacles, which not only increases the weight and resistance of the ship, but also causes corrosion and damage to the hull, while increasing fuel consumption and CO₂ emissions. Anti-fouling coatings are an important type of can prevent the attachment of Marine organisms, reduce the resistance of water flow and prolong the service life of ship.

Industrial paints and coatings grade preservatIives Umiguard Z10

Umiguard Z10 is an efficient and broad-spectrum anti mold, anti algae, and antibacterial agent used to protect water-based coating films in high humidity tropical climates.2-pyridinethiol-1-oxidezinc(commonly referred pyridinethione zinc) and imidazole based aqueous dispersions.

Dry Film PreservatIives Umiguard Z40

Umiguard Z40 is an effective broad-spectrum mildewcide algicide for the dry-film preservation of industrial products, which offer benefits including avoidance of discolouration, zero VOC content, temperature and pH stability, low-leaching, and high solubility for ease of formulation.

Antimicrobial Preservative Umiguard Z40 X

Umiguard Z40X is an effective broad-spectrum mildewcide algicide for the dry-film preservation of industrial products. This fine particle dispersion is specially formulated to not discolor due to interactions with various elements that can be present in some industrial formulations. In particular, soluble iron can react with zinc pyrithione the active ingredient in Umiguard Z40X and a gray-blue color may develop. By using Umiguard Z40X Antimicrobial in these formulations, reaction of iron with zinc pyrithione is suppressed.

Marine anti-fouling coating grade Zinc Umiguard powder（ZPT）

We focusing on the research, development, production and services of antfouling biocides, fungicides, preservatives, mildewcides, antibacterial agents and algaecides. Our products are widely used in paints and coatings, home and personal care, textiles and inks, crop protection, material protction and healthcare fields. 

In-can antimicrobial preservative series

We are a Leading microbial control solution provider. We adhere to independent innovation and technology research and development, and protect customers' assets with our strong technology research and development and implementation capabilities. Our formulation range offers benefitsincluding long-term preservation, fast-acting disinfection, temperatureand pH stability, zero VOC content and low viscosity for ease of handing. To meet modern market requirements ( EUH 208 and EN71 regulations).our in-can biocide range includes formulations that are free fromhalogens,formaldehyde, CMT/MT and MIT.  

Marine Anti-fouling Products Series

We are a Leading microbial control solution provider. We adhere to independent innovation and technology research and development, and protectour customers' assets with our strong technology research and evelopment and implementation capabilities. We focusing on the research, development, production and services of antfouling biocides, fungicides, preservatives, mildewcides, antibacterial agents andalgaecides. Our products are widely used in paints and coatings, home andpersonal care, textiles and inks, crop protection, materialprotc-tion and healthcare fields.

Sodium Umiguard Biocide/Dispersion for marine anti-fouling

Anti Fouling Agent：Copper Pyrithione Powder

Copper Pyrithione Powder Anti Fouling Agent

Copper Pyrithione Powder (CPT-98), also known as CuPT or CPT, is an effective anti-fouling and antimicrobial agent with a purity exceeding 98% (CAS No. 14915-37-8). This product, chemically named Bis(1-hydroxy-1H-pyridine-2-thionato-O,S) copper, is mainly used in marine antifouling coatings, various other coatings adhesives and so on.

Silyl Acrylate Self-polishing Resin SPSi-A100

AAB Group has launched Silyl Acrylate Self-Polishing Resin SPSi-A100, a high-performance binder resin developed based on advanced hydrolyzing acrylic silicone polymer technology. It is specifically designed for the next generation of environmentally friendly self-polishing antifouling coatings.  

Broad-spectrum Fungicide DCOIT 98%

AAB Group has launched a high-purity, high-stability series of DCOIT products. Among them, DCOIT 98%, as a dry-film broad-spectrum antifungal agent, has become a key additive for bio anti-corrosion, marine anti-fouling coatings, dry film preservative, wood coating, plastics, leather, papermaking, wood, textiles, printing and dyeing. It is also suitable for use as an additive in adhesives and inks, thanks to its broad-spectrum and long-lasting antimicrobial properties.

Copper Acrylate Self-polishing Resin SPCu-A100

Leveraging deep insight into biofouling dynamics throughout the entire vessel operating cycle, Kabasph’s marine antifouling product portfolio has been successfully applied to commercial fleets totaling over 30 million gross tons, with verified data showing an average fuel consumption reduction of 14.7% for customers.

View All Products

Corporate Culture

Persisting on the operation concept of "Pursue honesty and quality at the same time, win hearts and profits together", the China AAB group’s people insist on the enterprise spirit of “environmental-friendly and continuous innovation, and dedicates service to all followers and customers around the world.” we have become long-term stable suppliers for many paint giants in the Europe, North American, the Middle East, Southeast Asia, Japan, South Korea and other countries and regions.