product

Coating & paint grade wollastonite powder supplier

Wollastonite is an excellent extender pigment for powder coatings as well as solvent-based and water-based paints. Chemical formula is CaSiO₃, white, light gray, fibrous nonmetallic minerals, Non-toxic, small dilution, insulation, high temperature resistance,chemical corrosion resistance, weather resistance, low oil absorption value, thermal stability and good size. Unique acicular chemical properties and physical structures (fibrous).

Chemical Name :
Wollastonite Powder GHF01
Application :
Suitable for coatings and pigments, electrical insulation materials and ceramic industries.
Product model :
GHF01, GHF02, GHF03, GHF04, GHF05
Appearance :
White powder
brand :
Kmeris

Inquiry now

product introduction

Specification：

Wollastonite is an excellent extender pigment for powder coatings as well as solvent-based and water-based paints.Our such as GHF01, GHF02, GHF03, GHF04, GHF05 are widely used by automotive paint, marine protective paint, industrial solvent & water-based paint, adhessive and so on.

Wollastonite is mainly produced in the contact metamorphic zone between acidic intrusive rock and limestone, and the main mineral component of skarn. Our Paints & coating grade filler Wollastonite production capacity is over 50000 tons each year, welcome to visit our production base for visit.

Project & Standard	Wollastonite Powder
Product Code	GHF01
Appearance Color	White with slight gray and red
Chemical formula	CaSiO₃
Chemical properties	Wollastonite is a calcium metasilicate mineral. Triclinic system, thin plate-like crystals, aggregates are radial or fibrous
Whiteness Y	≥85
Topcut D97.	≤25
Average D50.	≤4.5
Aspeet ratio	3:1
Oil absorption（g/100g）	26-29
Loss on ignition(900℃,2h）	≤5
Water Solubility	Insoluble in water
PH	8-10
Conductivity	≤150μs/cm
Density（g/cm3）	2.9±0.05
Moisture	≤0.5
Storage conditions	Sealed in dry,Room Temperature
Wollastonite Content	100%

Features：

Excellent dielectric properties
High-quality raw materials for coatings
Easy to brush, the surface of a slide, has a high resistance to weathering
Acts as a flatten agent in coatings

Application:

It is widely used

In electrical insulation materials. When wollastonite forms non-conductive crystals, it has a very high insulation rate, which is a valuable material in high-quality electrical equipment.
In ceramic industry. It can produce glazed tiles, cleaning porcelain, daily-use porcelain, art porcelain, power porcelain, high-frequency low-consumption radio electric porcelain, chemical ceramics, glaze, color, glass, mold, etc.
In the paint with wollastonite filler or emulsion, you can get high-quality bright colors of paint, and have the coating and anti-aging properties. White wollastonite is a good raw material for high-quality white paint and soft pastel paint, It is suitable for the production of high-quality white paint and clear and transparent colored paint. The pigment produced by wollastonite can present pure white or bright bright color, and white paint can maintain a bright color for a long time.

Tags :

Leave A Message

categories

Featured products

Related Products

Ultra-thin marine protection grade glass flake KCF-015

Our Glass Flake KCF-015 can be applied in anti-corrosive coatings, paints, and pigments to prevent corrosion, and used as a reinforcement material to manufacture composite materials. Its particles form dense, inert barriers within the paint film. Overlapping layers of glass resist water and chemicals permeating the paint film. The addition of glass also increases the flexibility, hardness, and abrasion resistance of coatings. NCF-160 is manufacturered by Kmeris mineral, which is a world leading manufacturer of High performance Glass Flake. Our Glass Flake can be applied in anti-corrosive coatings, paints, and pigments to prevent corrosion, and used as a reinforcement material to manufacture composite materials. Its particles form dense, inert barriers within the paint film. Overlapping layers of glass resist water and chemicals permeating the paint film. The addition of glass also increases the flexibility, hardness, and abrasion resistance of coatings.

Anti-Corrosive Coatings Glass flake K-30 Manufacturer supplier

Glass flake K30 is a scale-like glass powder with an average thickness of 1 ~ 7um and a particle size of 10~~4000um. Mainly used in the industrial field. Glass flake with alkaline glass composition is used as a corrosion-resistant material in the field of coatings and lining of flue gas desulfurization devices, while Glass flake without alkaline glass composition is used in thermoplastic resin precision parts, which plays a great role in preventing warpage and improving dimensional accuracy.

Coating & paint grade wollastonite powder supplier

Wollastonite is an excellent extender pigment for powder coatings as well as solvent-based and water-based paints. Chemical formula is CaSiO3, white, light gray, fibrous nonmetallic minerals, Non-toxic, small dilution, insulation, high temperature resistance,chemical corrosion resistance, weather resistance, low oil absorption value, thermal stability and good size. Unique acicular chemical properties and physical structures (fibrous).  

Marine protection coating used Glass Flake KCF-2260

Our Glass Flake can be applied in anti-corrosive coatings, paints, and pigments to prevent corrosion, and used as a reinforcement material to manufacture composite materials. Its particles form dense, inert barriers within the paint film. Overlapping layers of glass resist water and chemicals permeating the paint film. The addition of glass also increases the flexibility, hardness, and abrasion resistance of coatings.

Dolomite Powder BYF01 for coatings and paints

Dolomite is a carbonate mineral with high whiteness and good stability, customized according requirement. Dolomite powder is widely used in coatings, building materials, ceramics, glass and refractories, chemical industry, agriculture, environmental protection energy saving and other fields.

Marine protecting coatings Hollow Glass Microbeads supplier

Hollow Glass Microspheres is a type of hollow silicate-aluminium microsphere refined from fly ash in thermal plant, also called cenosphere. The main component are silicate and aluminum oxide. It has very good heat stability, corrosion resistance, strength, insulation property, low thermal conductivity, non-toxic, low moisture absorption, good chemical stability. It has low density, combined with the inert property. It is widely used in oil drilling and insulation, plastic, rubber, coating, auto and construction industries.

Marine paint grade Dolomite Powder BYF02

  Density: 2.8-2.9   Hardness: 3.5-4.5 Dolomite is a carbonate mineral with high whiteness and good stability, customized according requirement. Kmeris Dolomite powder is widely used in coatings, building materials, ceramics, glass and refractories, chemical industry, agriculture, environmental protection energy saving and other fields.

Ultrafine natural barium sulfate

Density 3-3.4       Hardness 4.0-4.5 Barite powder also known as natural barium sulfate. Customized according requirement. The natural ultrafine barium sulfate is made of natural ultra-white ore, which is cleaned, dried, ground and graded. The product has the characteristics of high whiteness, bright color, high luster and brightness, good properties, high hardness and strong radiation absorption ability.

High purity filler Feldspar Powder for paint & coatings

Density: 2.5-2.6   Hardness: 6 Usually also known as orthoclase, it has the characteristics of lowmelting point, long melting interval and high melting viscosity. Customized according requirement.

Extra corrosion resistant coatings Glass Flake KCF-140

Our Glass Flake KCF-140 can be applied in anti-corrosive coatings, paints, and pigments to prevent corrosion, and used as a reinforcement material to manufacture composite materials. Its particles form dense, inert barriers within the paint film. Overlapping layers of glass resist water and chemicals permeating the paint film. The addition of glass flake also increases the flexibility, hardness, and abrasion resistance of coatings.

Automotive paint grade wollastonite powder

Wollastonite is an excellent extender pigment for powder coatings as well as solvent-based and water-based paints. Wollastonite is composed of Ca3 [Si3O9]. They are usually lamellar, radial, or fibrous aggregates. White micro stripe gray. Glass luster, cleavage surface pearl luster.  Hardness is 4.5 ~ 5.0.  Density 2.78~2.91 g/cm3. Wollastonite is suitable for liquid industrial and corrosion resistant coatings, powder coatings and semi-gloss architectural coatings, to get smoother films and improved gloss surface. Kmeris is a professional leading wollastonite producer for Paints & coatings industry. 

Marine paint grade wollastonite powder

Hardness is 4.5 ~ 5.0.  Density 2.78~2.91 g/cm3. Wollastonite is suitable for liquid industrial and corrosion resistant coatings, powder coatings and semi-gloss architectural coatings, to get smoother films and improved gloss surface. Kmeris is a professional leading wollastonite producer for Paints & coatings industry.  Chemical formula is CaSiO₃, white, light gray, fibrous nonmetallic minerals, Non-toxic, small dilution, insulation, high temperature resistance,chemical corrosion resistance, weather resistance, low oil absorption value, thermal stability and good size. Unique acicular chemical properties and physical structures (fibrous).

Marine paint grade Talc Powder F020

Talc micropowder is made of sliding stones through cleaning, screening, grinding, grading and other processes. It is a white powder, which has excellent physical and chemical properties such as lubricity, extinction, fire resistance, insulation, high melting point, chemical inactivity and strong adsorption. Kmeris Mineral Products is a leading producer of talcum powder in China. Our Superfine Talc Powder, Talc power F020 F017 F022 F018 F028 F023 F019&ensp;are widely used by famous international architectural paints factories world widely.    

Industrial grade Fused Silica Powder-RG1250

Fused silica powder is a kind of powder which is made of high-quality natural quartz and processed by a unique processing technology. After high temperature treatment, the molecular structure of natural quartz changed from ordered arrangement to disordered arrangement. Its color is white and its purity is high. At the same time, it has the following characteristics: very low linear expansion coefficient; It has good electromagnetic radiation performance, chemical corrosion resistance and stable chemical characteristics; Has reasonable, orderly and controllable particle size distribution.

Paint & Coatings Grade Talc powder F017

Talc powder&ensp;is an industrial mineral that has been used as a pigment and filler in paints & coating, paper making, rubber, modified plastic, ceramic, adhesive and other  industries. It is mainly composed of hydrous magnesium silicate, which is processed into powder after selection, washing and crushing. Kmeris Mineral Products is a leading producer of talcum powder in China. Our Superfine Talc Powder, Talc power F020 F017 F022 F018 F028 F023 F019&ensp;are widely used by famous international architectural paints factories world widely.

High performance Fused Silica Powder-RG600

Fused silica powder is an amorphous silicon dioxide powder material made by melting natural quartz into amorphous quartz through electric melting, and then through crushing, sorting, grinding, grading and other processes. Fused Silicon Powder for paint and coating has good stability and has been playing a major role in coating fillers. For example, the addition of silicon powder in high temperature resistant coatings (ceramic coatings) can not only play a role of filling but also improve the hardness of the paint film, enhance the paint resistance, scrub resistance, corrosion resistance, and meantime have the performance of assisting extinction.

Automotive paint grade Fused Silica Powder-RG400

Fused silica powder is made of natural SiO2 or molten amorphous SiO2 after high-temperature melting and cooling in natural quartz through crushing, ball milling (or vibration and jet milling), flotation, acid cleaning and high-purity water treatment. Fused Silicon Powder for paint and coating has good stability and has been playing a major role in coating fillers. For example, the addition of silicon powder in high temperature resistant coatings (ceramic coatings) can not only play a role of filling but also improve the hardness of the paint film, enhance the paint resistance, scrub resistance, corrosion resistance, and meantime have the performance of assisting extinction.

Precipitated barium sulphate PS-95 for powder coating

Precipitated barium sulphate features for high resistance to outdoor exposure and other chemicals, extremely fine particle size and a narrow particle size distribution D50≤ 4.5 µm, ideally-suited for high gloss applications. Our Precipitated barium sulphate is widely used by paints, powder coatings, ink and plastics.  

Automotive paint grade Precipitated barium sulphate PS-98

Precipitated barium sulfate is an amorphous white powder produced by chemical precipitation method, and its physical properties, purity and whiteness are better than those of superfine natural barium sulfate, which is non-toxic and tasteless.  

Cosmetics grade Nano TiO₂ KNR-308

This white powder pigment, primarily composed of titanium dioxide, stands as a testament to inertness, non-toxicity, and remarkable stability in chemical properties. This product was the white fluffy powder, which was coated with hydrated silica and alumina or/and organic agents such as stearic acid, triethoxyoctyl silica, polydimethyl silicone oil, and the main chemical constituents are titanium dioxide. The products made from KNR-308 as raw material or auxiliary material had excellent light resistance.

Coatings & paints grade Nano TiO₂ KNR-508

The appearance of KNR-508 was the white fluffy powder, which was coated with hydrated alumina or/and hydrated zirconia, and the main chemical constituents are titanium dioxide. The paint film not only had good light resistance, but also had angle-dependent optical effect, which made from KNR-508 and aluminium paint and other materials.

View All Products

Corporate Culture

Persisting on the operation concept of "Pursue honesty and quality at the same time, win hearts and profits together", the China AAB group’s people insist on the enterprise spirit of “environmental-friendly and continuous innovation, and dedicates service to all followers and customers around the world.” we have become long-term stable suppliers for many paint giants in the Europe, North American, the Middle East, Southeast Asia, Japan, South Korea and other countries and regions.

Need Help

Hot Tags

Products

Contact Us

Tel : +86 13951823978
WhatsApp : +86 13951823978
E-mail : bruce@aabindustrygroup.com
Address : No. 618, Building 01, Hongyang times business center, Jiangbei national New District, Nanjing, Jiangsu Province 210000