product

Chloroether Resin MP25 for heavy anti-corrosive paint

The full name of chloroether resin is vinyl chloride-isobutyl vinyl ether copolymer resin, which is polymerized by vinyl chloride monomer, isobutyl vinyl ether monomer and other raw materials. It is mainly used in the field of anti-corrosion coatings and composite inks.

Chemical Name :
Vinyl chloride-isobutyl vinyl ether copolymer resin
Application :
Extensively used for heavy anti-corrosive paint, such as steel structures, container paint, marine coatings, and industrial anti-corrosive paint.
Product model :
MP25

Inquiry now

product introduction

As a substitute for chlorinated rubber with carbon tetrachloride solvent method, chloroether resin for anticorrosive coatings is not only nontoxic and environmentally friendly, but also has advantages in coating flexibility, heat resistance, ultraviolet stability, alkali resistance and pulverization resistance, and can be compared with alkyd resin, hard resin, acrylic resin, epoxy resin and other additives, Plasticizer is miscible, and its comprehensive anticorrosion performance index is higher than that of chlorosulfonated polyethylene and chlorinated rubber coatings, so it is widely used in the following anticorrosion coatings:

(1) Industrial anticorrosive coatings, such as factory buildings, equipment, pipelines, storage tanks, municipal engineering harbors and docks, etc.

(2) Marine coatings are suitable for all parts of the hull and can resist sunlight exposure and seawater erosion well.

(3) Transport coatings, in addition to containers, there are transport machinery and dangerous goods tankers.

(4) Light metal bottom and top coat, such as garage doors and windows, roof rain gutters, balconies, lamp posts and highway anti-collision isolation boards.

(5) Large key projects, such as bridges, ocean engineering and energy engineering.

Specification:

Item	Unit	Index
		MP-15	MP-25	MP-35	MP-45	MP-60
Appearance	/	White fine powder
Chlorinity content	%	44±1
Volatile matter	%	≤0.50
Apparent density	g/mL	≥0.30
Viscosity (23℃ 20% toluene solution)	mPa•S	15±5	25±5	35±5	45±5	65±5

Application:

Index	Application
MP-15	Suitable for thick-form paint and performs well under acidic and alkaline conditions, such as swimming pools, construction, bridges, and road marking.
MP-25	Extensively used for heavy anti-corrosive paint, such as steel structures, container paint, marine coatings, and industrial anti-corrosive paint.
MP-35	Thicker than MP25, which is used for anti-corrosive paint on light metals like aluminum and zinc.
MP-45	Specifically designed for solvent-based gravure ink and plastic composite ink (OPP & PE)
MP-60	Used for special inks or metal adhesives.

Package & Storage:

20kg composite kraft paper packaging bag (including inner bag)

Others: can be customized according to customer's needs.

Tags :

Leave A Message

categories

Featured products

Related Products

Cheap Cellulose Acetate Butyrate CAB-381-2

CAB-381-2 is a cellulose ester with high butyryl content, high viscosity and big molecular weight. Our CAB-381-2 offers a combination of excellent solubility and compatibility, moisture resistance, excellent surface hardness, and good film strength.   For those excllent performances, our CAB-381-2 is widely use in various paints, inks and adhesives as automotive paint, wood coating, mororcycle paint,plastic coating, textile coating, ink, nailpolish, leather paint and so on.

High viscosity Cellulose acetate butyrate CAB-381-2

CAB-381-2 features for high butyryl content and high viscosity. it is widely used for automotive OEM, Auto plastics, Auto refinish, Automotive parts & accessories, Automotive protective coatings, automotive lacquers, automotive interior Paints and Coatings,  automotive exterior Paints and Coatings, and so on.  

Cheap Cellulose Acetate Butyrate CAB-381-0.5 Supply

Cheap Cellulose Acetate Butyrate CAB-381-0.5 SupplyCellulose Acetate Butyrate (CAB 381-0.5) is a cellulose ester with medium butyryl content, low viscosity, clear and colorless solution if disolved in solvent. Also Our CAB-381-0.5 is soluble in a wide range of solvents and compatible such as NC/acrylic resins.   CAB-381-0.5 is widely use in Automotive Coatings, Truck/Bus/Commercial Vehicles paint, Plastics metal coatings & paints, Printing Inks, Nail polish, personal care, wood coating and so on.

Cellulose Acetate Butyrate 381-0.1 for textile paint

Cellulose Acetate Butyrate (CAB 381-0.1) is a cellulose ester with medium butyryl content and low viscosity. It was designed for use where low-application viscosities at relatively high solids levels is needed. It is soluble in a wide range of solvents and compatible with many other resins. It will also tolerate the use of solvent blends currently exempt from certain air pollution regulations. It is supplied as a dry, free-flowing powder.

Aldehyde Resin A81

Aldehyde resin KLT series are a kind of aldehyde condensation resin, which is colorless or yellowish. It is soluble in almost paint solvents but not in water and compatible with almost coating raw materials, it is excellently yellowing-resistant. It is usually as grinding resin in universal pigment dispersion and applied widely in coating formulation. It can effectively improve adhesion, hardness, gloss, solid content of paint and fullness of coatings. It is a kind of excellent multifunctional additive to coating/painting.

Chloroether Resin MP60 for special inks

1,6-Hexanediol HDO used for printing inks

1,6-Hexanediol (HDO) appears as white color flake. It is solid at room temperature and has good stability at normal ambient temperature. It is soluble in water, methanol, butanol, butyl acetate, slightly soluble in hot ether, insoluble in benzene; strong hygroscopicity; sensitive to humidity, oxidising agents, reducing agents, acid chlorides, acid anhydrides, chloroformates, etc.

Dodecanedioic Acid for powder coatings

Dodecanediacetic acid is white powdery which is less soluble in water, but better soluble in organic solvents such as ethanol. After decomposing or polymerizing, it has no reaction at normal temperature and pressure. The product is difficult to burn. It has good thermal stability. The toxicity of dodecanediacetic acid is very low, but it is irritating to mucous membrane and skin.

Chloroether Resin MP25 for heavy anti-corrosive paint

View All Products

Corporate Culture

Persisting on the operation concept of "Pursue honesty and quality at the same time, win hearts and profits together", the China AAB group’s people insist on the enterprise spirit of “environmental-friendly and continuous innovation, and dedicates service to all followers and customers around the world.” we have become long-term stable suppliers for many paint giants in the Europe, North American, the Middle East, Southeast Asia, Japan, South Korea and other countries and regions.