product

Printing Ink grade antimicrobial preservatives Umiguard BL10

Umiguard BL10 is a broad-spectrum preservative, which is used to protect waterborne industrial products from bacteria, yeasts and molds.

Umiguard BL10 contains 10% 1,2-benzisothiazolin -3- one (BIT) in water as solvent.

Chemical Name :
In-Can Preservatives Umiguard BL10
Application :
Efficient inhibition of mold, yeast, and algae growth, green and stable, heat-resistant, and UV resistant.
Product model :
Umiguard MBS/MB5050/BCI/CMC/K150/BS20/BL10/BD20
brand :
Kabasph

Inquiry now

product introduction

Application：

Umiguard BL10 is effective in synthetic polymer emulsions,emulsion paints, water-based adhesives, household products, tape joint compounds, printing inks, paper coating compositions, metal working fluids, agricultural pesticide products, aqueous mineral and pigment slurries.

Product Specification:

Typical Physical Properties


Composition	A solution of 1,2-benzisothiazolin-3-one in water
Physical form	Yellow to light brown solution
Viscosity at 25℃	100-400mPas
pH at 25℃	11.0 - 13.0
Boiling Point	100℃
Boiling Point	100℃
Flash point	Boils without flashing
Storage stability	Stable under normal conditions of storage down to 0℃. If frozen, allow to thaw and stir well before use.
Compatibility	Incompatible with alkalis and some oxidizing and reducing agents e.g. persalts, sulphites.
Density at 25℃	1.12 - 1.16g/ml

Specification:

Product Name	Antimicrobial Activity	Suit PH	Physical Form	Typical Dose Levels (%w/w)	Performance Effect
Oamiguard MBS	Bacteria, Fungi (Yeast & Molds)	2-12	Liquid	0.2-0.6%	Long acting broad-spectrum fungicide, zero VOC,excellent product stability and compatibility
Oamiguard MB5050	Bacteria, Fungi (Yeast & Molds)	2-12	Liquid	0.2-0.6%	Long acting broad-spectrum fungicide, zero VOC,excellent product stability and compatibility.
Oamiguard BCI	Bacteria, Fungi (Yeast & Molds)	2-9	Aqueous Dispersion	0.1-0.5%	Organic combination of rapid sterilization and long-term protection, broad-spectrum sterilization, zero VOC, recommended dosage range that meets the latest green coating standards.
Oamiguard CMC	Bacteria, Fungi (Yeast & Molds)	2-9	Clear green liquid	0.1-0.3%	Efficient broad-spectrum fungicides with excellent cost-effectiveness and stability.
Oamiguard K150	Bacteria, Fungi (Yeast & Molds)	2-9	Clear yellow liquid	0.1-0.3%	Efficient broad-spectrum fungicides with excellent cost-effectiveness and stability.
Oamiguard BL10	Bacteria, Fungi (Yeast & Molds)	2-9	Clear yellow liquid	0.1-0.3%	VOC Long acting broad-spectrum sterilization, excellent thermal stability and compatibility, zero VOC.
Oamiguard BZ	Bacteria, Fungi (Yeast & Molds)	4-10	Aqueous Dispersion	0.1-0.5%	Complies with the latest green coating standards and is a new type of long-lasting protective preservative.
Oamiguard Z50	Bacteria, Fungi (Yeast & Molds)	4-10	Aqueous Dispersion	0.1-1.0%	Complies with the latest green coating standards and is a new type of long-lasting protective preservative.
Oamiguard BS20	Bacteria, Fungi (Yeast & Molds)	2-12	Clear yellow liquid	0.05-0.15%	Long acting broad-spectrum sterilization, excellent thermal stability and pH stability, free of AOX and formaldehyde.
Oamiguard BD20	Bacteria, Fungi (Yeast & Molds)	2-12	Aqueous Dispersion	0.05-0.15%	Long acting broad-spectrum sterilization, excellent thermal stability and pH stability.

Transportation and storage:

Stable under normal conditions of storage down to -10℃. If frozen, allow to thaw and stir well before use. Active agents are heat-stable and non-volatilese.

Plastic drums: 25 kg , IBCs: 1,000 kg

Tags :

Leave A Message

categories

Featured products

Related Products

Ultral fine zinc pyrithione powder ZPT-98

Zinc Pyrithione Powder is a solid, powder form of zinc pyrithione preservative (CAS No. 13463-41-7) that provides antimicrobial protection.   Our Kabasph® brand Zinc Pyrithione Powder is widely applied to cosmetic preservative, personal care, paint and coatings, plastics and textiles, inks and anti-fouling and other industrial preserve application.  

Zinc Pyrithione Aqueous Disperion ZPT-48

Zinc Pyrithione 48% Aqueous Dispersion ZPT-48 CAS 13463-41-7 is a mixture in water of very fine particles of zinc pyrithione, a dispersant, and a viscosity microbial control agent.   Our Kabasph® Zinc Pyrithione Aqueous Dispersion ZPT-48  is widely applied to paint, cosmetics, personal care, adhesives, sealants, plastic,rubber, latex, textiles and so on.

Printing Ink grade antimicrobial preservatives Umiguard BL10

Umiguard BL10 is a broad-spectrum preservative, which is used to protect waterborne industrial products from bacteria, yeasts and molds. Umiguard BL10 contains 10% 1,2-benzisothiazolin -3- one (BIT) in water as solvent.  

View All Products

Corporate Culture

Persisting on the operation concept of "Pursue honesty and quality at the same time, win hearts and profits together", the China AAB group’s people insist on the enterprise spirit of “environmental-friendly and continuous innovation, and dedicates service to all followers and customers around the world.” we have become long-term stable suppliers for many paint giants in the Europe, North American, the Middle East, Southeast Asia, Japan, South Korea and other countries and regions.